init

replaced_file/Makefile.libpq

@@ -0,0 +1,159 @@
+#-------------------------------------------------------------------------
+#
+# Makefile for src/interfaces/libpq library
+#
+# Portions Copyright (c) 1996-2016, PostgreSQL Global Development Group
+# Portions Copyright (c) 1994, Regents of the University of California
+#
+# src/interfaces/libpq/Makefile
+#
+#-------------------------------------------------------------------------
+
+subdir = src/interfaces/libpq
+top_builddir = ../../..
+include $(top_builddir)/src/Makefile.global
+
+
+# shared library parameters
+NAME= pq
+SO_MAJOR_VERSION= 5
+SO_MINOR_VERSION= 9
+
+override CPPFLAGS :=  -DFRONTEND -DUNSAFE_STAT_OK -I$(srcdir) $(CPPFLAGS) -I$(top_builddir)/src/port -I$(top_srcdir)/src/port
+ifneq ($(PORTNAME), win32)
+override CFLAGS += $(PTHREAD_CFLAGS)
+endif
+
+# Need to recompile any external C files because we need
+# all object files to use the same compile flags as libpq; some
+# platforms require special flags.
+LIBS := $(LIBS:-lpgport=)
+
+# We can't use Makefile variables here because the MSVC build system scrapes
+# OBJS from this file.
+OBJS=	fe-auth.o fe-connect.o fe-exec.o fe-misc.o fe-print.o fe-lobj.o \
+	fe-protocol2.o fe-protocol3.o pqexpbuffer.o fe-secure.o \
+	libpq-events.o
+# libpgport C files we always use
+OBJS += chklocale.o inet_net_ntop.o noblock.o pgstrcasecmp.o pqsignal.o \
+	thread.o
+# libpgport C files that are needed if identified by configure
+OBJS += $(filter crypt.o getaddrinfo.o getpeereid.o inet_aton.o open.o system.o snprintf.o strerror.o strlcpy.o strnlen.o win32error.o win32setlocale.o, $(LIBOBJS))
+# backend/libpq
+OBJS += ip.o md5.o
+# utils/mb
+OBJS += encnames.o wchar.o
+
+ifeq ($(with_openssl),yes)
+OBJS += fe-secure-openssl.o
+endif
+
+ifeq ($(PORTNAME), cygwin)
+override shlib = cyg$(NAME)$(DLSUFFIX)
+endif
+
+ifeq ($(PORTNAME), win32)
+# pgsleep.o is from libpgport
+OBJS += pgsleep.o win32.o libpqrc.o
+
+libpqrc.o: libpq.rc
+	$(WINDRES) -i $< -o $@
+
+ifeq ($(enable_thread_safety), yes)
+OBJS += pthread-win32.o
+endif
+endif
+
+
+# Add libraries that libpq depends (or might depend) on into the
+# shared library link.  (The order in which you list them here doesn't
+# matter.)
+ifneq ($(PORTNAME), win32)
+SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi_krb5 -lgss -lgssapi -lssl -lsocket -lnsl -lresolv -lintl, $(LIBS)) $(LDAP_LIBS_FE) $(PTHREAD_LIBS)
+else
+SHLIB_LINK += $(filter -lcrypt -ldes -lcom_err -lcrypto -lk5crypto -lkrb5 -lgssapi32 -lssl -lsocket -lnsl -lresolv -lintl $(PTHREAD_LIBS), $(LIBS)) $(LDAP_LIBS_FE)
+endif
+ifeq ($(PORTNAME), win32)
+SHLIB_LINK += -lshell32 -lws2_32 -lsecur32 $(filter -leay32 -lssleay32 -lcomerr32 -lkrb5_32, $(LIBS))
+endif
+
+SHLIB_EXPORTS = exports.txt
+SUBDIRS = encryptsql 	
+.NOTPARALLEL: 			
+$(recurse)				
+SHLIB_LINK += -Lencryptsql/build/lib -lencryptsql -lssl
+
+all: all-lib
+
+# Shared library stuff
+include $(top_srcdir)/src/Makefile.shlib
+backend_src = $(top_srcdir)/src/backend
+
+
+# We use several libpgport and backend modules verbatim, but since we need
+# to compile with appropriate options to build a shared lib, we can't
+# necessarily use the same object files built for libpgport and the backend.
+# Instead, symlink the source files in here and build our own object files.
+# For some libpgport modules, this only happens if configure decides
+# the module is needed (see filter hack in OBJS, above).
+
+chklocale.c crypt.c getaddrinfo.c getpeereid.c inet_aton.c inet_net_ntop.c noblock.c open.c system.c pgsleep.c pgstrcasecmp.c pqsignal.c snprintf.c strerror.c strlcpy.c strnlen.c thread.c win32error.c win32setlocale.c: % : $(top_srcdir)/src/port/%
+	rm -f $@ && $(LN_S) $< .
+
+ip.c md5.c: % : $(backend_src)/libpq/%
+	rm -f $@ && $(LN_S) $< .
+
+encnames.c wchar.c: % : $(backend_src)/utils/mb/%
+	rm -f $@ && $(LN_S) $< .
+
+
+distprep: libpq-dist.rc
+
+libpq.rc libpq-dist.rc: libpq.rc.in
+	sed -e 's/\(VERSION.*\),0 *$$/\1,'`date '+%y%j' | sed 's/^0*//'`'/' $< >$@
+
+# Depend on Makefile.global to force rebuild on re-run of configure.
+# (But libpq-dist.rc is shipped in the distribution for shell-less
+# installations and is only updated by distprep.)
+libpq.rc: $(top_builddir)/src/Makefile.global
+
+fe-connect.o: fe-connect.c $(top_builddir)/src/port/pg_config_paths.h
+fe-misc.o: fe-misc.c $(top_builddir)/src/port/pg_config_paths.h
+
+$(top_builddir)/src/port/pg_config_paths.h:
+	$(MAKE) -C $(top_builddir)/src/port pg_config_paths.h
+
+install: all installdirs install-lib
+	$(INSTALL_DATA) $(srcdir)/libpq-fe.h '$(DESTDIR)$(includedir)'
+	$(INSTALL_DATA) $(srcdir)/libpq-events.h '$(DESTDIR)$(includedir)'
+	$(INSTALL_DATA) $(srcdir)/libpq-int.h '$(DESTDIR)$(includedir_internal)'
+	$(INSTALL_DATA) $(srcdir)/pqexpbuffer.h '$(DESTDIR)$(includedir_internal)'
+	$(INSTALL_DATA) $(srcdir)/pg_service.conf.sample '$(DESTDIR)$(datadir)/pg_service.conf.sample'
+
+installcheck:
+	$(MAKE) -C test $@
+
+installdirs: installdirs-lib
+	$(MKDIR_P) '$(DESTDIR)$(includedir)' '$(DESTDIR)$(includedir_internal)' '$(DESTDIR)$(datadir)'
+
+uninstall: uninstall-lib
+	rm -f '$(DESTDIR)$(includedir)/libpq-fe.h'
+	rm -f '$(DESTDIR)$(includedir)/libpq-events.h'
+	rm -f '$(DESTDIR)$(includedir_internal)/libpq-int.h'
+	rm -f '$(DESTDIR)$(includedir_internal)/pqexpbuffer.h'
+	rm -f '$(DESTDIR)$(datadir)/pg_service.conf.sample'
+
+clean distclean: clean-lib
+	$(MAKE) -C test $@
+	rm -f $(OBJS) pthread.h libpq.rc
+# Might be left over from a Win32 client-only build
+	rm -f pg_config_paths.h
+	rm -f inet_net_ntop.c noblock.c pgstrcasecmp.c pqsignal.c thread.c
+	rm -f chklocale.c crypt.c getaddrinfo.c getpeereid.c inet_aton.c open.c system.c snprintf.c strerror.c strlcpy.c strnlen.c win32error.c win32setlocale.c
+	rm -f pgsleep.c
+	rm -f md5.c ip.c
+	rm -f encnames.c wchar.c
+
+maintainer-clean: distclean maintainer-clean-lib
+	$(MAKE) -C test $@
+	rm -f libpq-dist.rc